- 您现在的位置：买卖IC网 > Sheet目录215 > CP2000AC54TEZ (GE Energy)POWER SUPPLY 2KW RACK MOUNT
TECHN I CAL SP ECI FI CATI ON S – R ECTIFIER
Output
Voltage Default
Voltage Adjust Range
- Hardware set via margin pin
CP2000 TEZ
54 Vdc
44 – 58 Vdc
42 – 58 Vdc
CP2725 TEZ
54 Vdc
44 – 58 Vdc
- I 2 C or RS485 set
Output Current
25 Adc, 54V
42 – 58 Vdc
- Low-Line
- High-Line
Output Power
- Low-Line
- High-Line
Psophometric Noise
Ripple (5Hz to 20MHz)
- RMS
37 Adc, 54V
38.4 Adc, 52V
1200 Watts
2000 Watts
4 mVrms max
150 mVrms
250 mVpk-pk
25 Adc, 54V
50.5 Adc, 54V
53.4 Adc, 52V
1200 Watts
2725 Watts
4 mVrms max
150 mVrms
- Peak-to-Peak
Overvoltage Protection
60 Vdc (200 ms delayed shutdown)
250 mVpk-pk
- Delayed
65 Vdc (Instantaneous shutdown above this point.)
60 Vdc (200 ms delayed shutdown)
- Immediate
Over Temperature
5°C
65 Vdc (Instantaneous shutdown above this point.)
- Warning
- Shutdown
- Auto-recoverable
20°C Temperature hysteresis of approximately 10°C provided
between shutdown and restart.
5°C
20°C
Temperature hysteresis of approximately 10°C provided
between shutdown and restart.
Overload Current Limit
- Low Line
Overload Current Limit
- High Line
26 Adc Hi-Cap
39 Adc Hi-Cap
26 Adc Hi-Cap
53 Adc Hi-Cap
Overload Current Limit > 41.5Vo
- High Line
Overload System Power Up
Overall Regulation
Current Share
Proportional Current Share
External Bulk Load Capacitance
Turn-ON Delay
Turn-ON Rise Time
Turn-ON Overshoot
Load Step Response
Load Step Response ΔI
Load Step Response ΔV
Load Step Response Time
03/12 Compact Power Line
39.2 - 42.9 Adc Fold_down current limit (FL = 38.5A @ 52V)
Hiccup mode with a 10% duty cycle enabled below 39Vdc.
Latched mode current limit optional. Above 275V input the
voltage level at which current limit changes states is 45V.
There is a 30 second delay prior to shifting to the lower limit.
Units should be able to be plugged in one at a time and
guarantee system start up. Units should stay in current limit
for approximately 20 seconds to guarantee restart.
-2% to +2% includes all variations due to specified load
range, drift, and environmental conditions.
-5%FL to +5%FL compared to the average output current
delivered by a set of rectifiers. Loads > 50% FL
<7%FL among rectifiers of different output capacities
5,000μF max External capacitance can be increased but the
power supply will not meet its turn-ON rise time requirement
5 seconds
Monotonic Turn_ON from 30% to 100% of Vnom
above -5°C operation.
Monotonic Turn_On from 60% to 100% of Vnom
below -5°C operation.
100 ms standard (PMBus)
8 s telecom (RS-485)
2%
ΔI/Δt slew rate 1A/μs
50%FL Setting time to within regulation requirements
2.0Vdc Minimum load of 2.5A required
2 ms
? 2012 General Electric Company. All rights reserved.
53-58 Adc Fold_down current limit (FL = 52.4A @ 52V) Hiccup
mode with a 10% duty cycle enabled below 39Vdc. Latched
mode current limit optional. Above 275V input the voltage
level at which current limit changes states is 45V. There is a
30 second delay prior to shifting to the lower limit.
Units should be able to be plugged in one at a time and
guarantee system start up. Units should stay in current limit
for approximately 20 seconds to guarantee restart.
-2% to +2% includes all variations due to specified load
range, drift, and environmental conditions.
-5%FL to +5%FL compared to the average output current
delivered by a set of rectifiers. Loads > 50% FL
<7%FL among rectifiers of different output capacities
5,000μF max External capacitance can be increased but the
power supply will not meet its turn-ON rise time requirement
5 seconds
Monotonic Turn_ON from 30% to 100% of Vnom
above -5°C operation.
Monotonic Turn_On from 60% to 100% of Vnom
below -5°C operation.
100 ms standard (PMBus)
8 s telecom (RS-485)
2%
ΔI/Δt slew rate 1A/μs
50%FL Setting time to within regulation requirements
2.0Vdc Minimum load of 2.5A required
2 ms
Page 3
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
CPCI-A-3U-200C
PWR SUPLY AC/DC CPCI 200W 3UX8HP
CPCI200A-1C
POWER SUPPLY CPCI AC-DC 200W
CPDER12V-HF
DIODE ESD BIDOR 1CH 0503
CPDER12V0U-HF
DIODE ESD UNIDIR 1CH 0503
CPDER12V0U
DIODE ESD UNIDIR 1CH 12V 0503
CPDER24V-HF
DIODE ESD BIDIR 1CH 0503
CPDER24V0U-HF
DIODE ESD UNIDIR 1CH 0503
CPDER5V0-HF
DIODE ESD BIDIR 5V 1CH 0503
相关代理商/技术参数
CP2000DC54
制造商:LINEAGEPOWER 制造商全称:LINEAGEPOWER 功能描述:Compact Power Line Input: -40 to -72 Vdc; Outputs: ±54 Vdc at 2000W; 5 Vdc at 4W
CP2000DC54_PEZ
制造商:GE Energy (formerly Lineage Power) 功能描述:CP2000DC54PEZ
CP2000DC54-PE
功能描述:线性和开关式电源 -40 to -72Vdc +/-54Vdc 2000W
RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度:
CP2000DC54PEZ
制造商:GE CRITICAL POWER 功能描述:DC/DC CONVERTER 2000W +/-54V
CP2000DC54-PEZ
功能描述:线性和开关式电源 -40 to -72Vdc +/-54Vdc 2000W
RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度:
CP2001-7R
功能描述:EURO-CASSETTE 120W 4X 5.1V RoHS:否 类别:电源 - 外部/内部（非板载） >> DC DC Converters 系列:* 标准包装:1 系列:Quint 类型:隔离 输入电压:24V 输出:24V 输出数:1 输出 - 1 @ 电流（最大）:24 VDC @ 50A 输出 - 2 @ 电流（最大）:- 输出 - 3 @ 电流（最大）:- 输出 - 4 @ 电流（最大）:- 功率（瓦特）:1200W 安装类型:底座安装 工作温度:0°C ~ 40°C 效率:- 封装/外壳:模块 尺寸/尺寸:4.33" L x 9.09" W x 6.14" H（110mm x 231mm x 156mm） 包装:散装 电源（瓦特）- 最大:1200W 批准:- 其它名称:277-69722866365-NDQUINT-BAT/24DC/12AH
CP2001-9R
功能描述:EURO-CASSETTE 120W 4X 5.1V RoHS:否 类别:电源 - 外部/内部（非板载） >> DC DC Converters 系列:* 标准包装:1 系列:Quint 类型:隔离 输入电压:24V 输出:24V 输出数:1 输出 - 1 @ 电流（最大）:24 VDC @ 50A 输出 - 2 @ 电流（最大）:- 输出 - 3 @ 电流（最大）:- 输出 - 4 @ 电流（最大）:- 功率（瓦特）:1200W 安装类型:底座安装 工作温度:0°C ~ 40°C 效率:- 封装/外壳:模块 尺寸/尺寸:4.33" L x 9.09" W x 6.14" H（110mm x 231mm x 156mm） 包装:散装 电源（瓦特）- 最大:1200W 批准:- 其它名称:277-69722866365-NDQUINT-BAT/24DC/12AH
CP2002
制造商:未知厂家 制造商全称:未知厂家 功能描述:Interface IC